Caring for Plumbing Fixtures Finishes
Solid Surfacing Materials
  • Use an ammonia-based cleaner for most stains. Remove water marks with a damp cloth then towel dry
  • Use an abrasive cleaner and a 'Scotch Brite' pad to remove more difficult stains
  • Periodically clean the sink by filling it one-quarter full with a 50/50 solution of water and bleach. Let it soak for 15 minutes, then rinse thoroughly.
  • For minor cuts and scratches, sand with a 180-220 grit fine sandpaper until the cut is gone. Restore the finish with an abrasive cleaner and 'Scotch Brite' pad

Go back to Care and Installation